![background image](http://html1.mh-extra.com/html/kramer/vsm-4x4hfs/vsm-4x4hfs_user-manual_2001468021.webp)
16
VSM-4x4HFS - Connecting and Operating the VSM-4x4HFS
5.4
The QUAD Mode
The QUAD view shows any four inputs on one screen (each quarter of a screen
can show any selected input) and outputs it identically to all four outputs (OUTPUT
A to OUTPUT D).
Figure 8
shows the order in which the outputs are set in the
QUAD mode (this order cannot be configured):
Figure 8: the VSM-4x4HFS QUAD Operation Mode Input Orientation
5.4.1
Connecting the VSM-4x4HFS in the Quad Operation Mode
To connect the
VSM-4x4HFS
in the QUAD mode as illustrated in
Figure 9
, do the
following:
1. Connect an HDMI source to up to four inputs (for example, a Blu-ray disk
player) to the INPUT 1 connector (from 1 to 4), not shown in
Figure 9
.
2. Connect the HDMI output connectors OUTPUT A, OUTPUT B, OUTPUT C
and OUTPUT D to an HDMI acceptor (for example, to LCD displays).
Note that you do not have to connect all the outputs
3. Connect the power cord (not shown in
Figure 9
).
4. If required, connect:
A PC via RS-232, see
Section
6.3
The ETHERNET port, see
Section
6.4
All four inputs are displayed on each output.
Summary of Contents for VSM-4x4HFS
Page 2: ......
Page 3: ......
Page 43: ...38 VSM 4x4HFS Controlling the VSM 4x4HFS...
Page 84: ......