Kramer VSM-4x4HFS, User Manual

Page: 11 / 85

Figure 1: VSM-4x4HFS 4x4 Seamless Matrix Switcher/Multi-Scaler Front Panel
# Feature Function
1 IR LED Lights when the unit accepts IR remote commands
IR Receiver Receives signals from the remote control transmitter
2 OUTPUT/WINDOW
Selector Buttons In the MATRIX mode: select the output to which the input is switched (A, B, C or D)
In the VIDEO WALL mode: not used
In the DUAL mode: select one of the two DUAL windows (A or B for DUAL A; C or D for DUAL B), see
Section
5.3
In the QUAD mode: not used
3 INPUT Selector Buttons Press to select an HDMI input (from 1 to 4) to switch to the output
4 ALL Button Press ALL followed by an INPUT button to connect that input to all the outputs (not available for the video wall mode)
5 OFF Button Press after pressing an output button to disconnect the selected output from the inputs. To disconnect all the outputs, press ALL followed
by OFF
6 TAKE Button Press to toggle between the Confirm mode (when in the Confirm mode, the TAKE button lights ) and the At Once mode. When in TAKE
mode, front panel buttons actions are implemented after pressing the TAKE button (see
Section
6.1.2
)
7 MODE
Buttons MATRIX Press to operate the system as a matrix switcher (see Section
5.1
)
8 VIDEO WALL Press to operate as a 2x2 video wall (see Section
5.2
)
9 DUAL Press to operate as a 4x2 switcher with PIP capabilities (see Section
5.3
)
10 QUAD Press to display all four inputs on each of the outputs (see Section
5.4
)
11 STO Button Press to store a configuration (see Section
6.1.3
)
12 RCL Button Press to recall a configuration (see Section
6.1.3
)
13 IDENTIFY Button Press to indicate on each output, which input is displayed on the output. The display time is set via the OSD menu (see Section
6.2.1
)
14 MENU Press to access the OSD menu, exit the OSD menu and, when in the OSD menu, move to the previous level in the OSD screen (see
Section
6.1.2
)
15 Navigation
Buttons ENTER Press to access sub-menu items and select from several settings (see Section
6.1.2
)

Press to decrease numerical values or select from several definitions
When not within the OSD menu mode, press to reduce volume (for embedded HDMI inputs, this does not affect the embedded output)

Press to move up the menu list values (see Section
6.1.2
)
6
VSM
-4
x
4
H
F
S
–
O
v
e
rv
ie
w