![background image](http://html1.mh-extra.com/html/kramer/vs-88h2a/vs-88h2a_user-manual_2001441013.webp)
Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
11
VS-88H2A
setup processes timeout after 10 seconds.
The
VS-88H2A
front panel buttons enable performing the following functions:
▪
, on page
▪
, on page
▪
, on page
▪
, on page
▪
, on page
▪
, on page
Routing Signals
You can switch the video and the audio signals together (AFV) or switch them separately, via
the following switching modes:
▪
, on page
▪
Routing an Audio Input to the Analog Audio Output
, on page
▪
Routing an Audio Input to the Digital HDMI Output
, on page
▪
Switching Video and Audio Signal Simultaneously
, on page
▪
, on page
▪
, on page
▪
, on page
Switching the Video Signal
The
VIDEO
button on the
VS-88H2A
front panel enables video routing.
To switch a video input to an output:
1. Press
VIDEO
.
The button illuminates and the 7-segment display
shows the current IN-OUT video
status.
On the front panel buttons:
•
An illuminated input button means that an active signal is detected on that input.
•
An illuminated output button means that a display is connected to that output.
•
A flashing output button means that a non-HDCP display is connected to that output.
Note that in the case that an HDCP-encrypted input is routed through the matrix to a
non-HDCP screen, the video will not be presented and the non-HDCP screen will
turn black.