![background image](http://html1.mh-extra.com/html/kramer/vs-88h2a/vs-88h2a_user-manual_2001441070.webp)
Kramer Electronics Ltd.
VS-88H2A
– Protocol 3000
68
Function
Description
Syntax
Parameters/Attributes
Example
BUILD-
DATE?
Get device build date.
COMMAND
#BUILD-DATE?
<CR>
FEEDBACK
~nn@BUILD-DATE
date
,
time
<CR><LF>
date
– Format: YYYY/MM/DD
where
YYYY = Year
MM = Month
DD = Day
time
– Format: hh:mm:ss where
hh = hours
mm = minutes
ss = seconds
Get the device build date:
#BUILD-DATE?
<CR>
CPEDID
Copy EDID data from
the output to the input
EEPROM.
Destination bitmap
size depends on
device properties (for
64 inputs it is a 64-bit
word).
Example: bitmap
0x0013 means inputs
1,2 and 5 are loaded
with the new EDID.
In certain products
Safe_mode is an
optional parameter.
See the HELP
command for its
availability.
COMMAND
#CPEDID
edid_io
,
src_id
,
dst_type
,
dest_bitmap
<CR>
or
#CPEDID
edid_io
,
src_id
,
dst_type
,
dest_bitmap
,
safe_mode
<CR>
FEEDBACK
~nn@CPEDID
edid_io
,
src_id
,
dst_type
,
dest_bitmap
<CR><LF>
~nn@CPEDID
edid_io
,
src_id
,
dst_type
,
dest_bitmap
,
safe_mode
<
CR><LF>
edid_io
–
EDID
source type
(usually output)
0
– Input
1
– Output
2
– Default EDID
src_id
– Number of chosen source
stage
For input source:
1
– HDMI IN 1
2
– HDMI IN 2
3
– HDMI IN 3
4
– HDMI IN 4
5
– HDMI IN 5
6
– HDMI IN 6
7
– HDMI IN 7
8
– HDMI IN 8
For output source:
0
– Default EDID source
1
– HDMI OUT 1
2
– HDMI OUT 2
3
– HDMI OUT 3
4
– HDMI OUT 4
5
– HDMI OUT 5
6
– HDMI OUT 6
7
– HDMI OUT 7
8
– HDMI OUT 8
dst_type
–
EDID destination
type
(usually input)
0
– Input
dest_bitmap
– Bitmap
representing destination IDs.
Format: XXXX…X, where X is hex
digit. The binary form of every hex
digit represents corresponding
destinations.
0
– indicates that EDID data is not
copied to this destination.
1
– indicates that EDID data is
copied to this destination.
safe_mode
– Safe mode
0
– device accepts the EDID as is
without trying to adjust
1
– device tries to adjust the EDID
(default value if no parameter
is sent)
Copy the EDID data from the
Output 1 (EDID source) to the
Input:
#CPEDID
1
,
1
,
0
,
0x1
<CR>
Copy the EDID data from the
default EDID source to the
Input:
#CPEDID
2
,
0
,
0
,
0x1
<CR>
DIR
List files in device.
COMMAND
#DIR
<CR>
FEEDBACK
Multi-line:
~nn@DIR
<CR><LF>
file_name TABfile_size
bytes
,
id:
file_id
<CR><LF>
TABfree_size
bytes
.
<CR><LF>
file_name
– Name of file
file_size
– File size in bytes. A
file can take more space on device
memory
file_id
– Internal ID for file in file
system
free_size
– Free space in bytes
in device file system
#DIR
<CR>
DISPLAY?
Get output HPD
status.
COMMAND
#DISPLAY?
out_index
<CR>
FEEDBACK
~nn@DISPLAY
out_index
,
status
<CR><LF>
out_index
– Number that
indicates the specific output:
1
– HDMI OUT 1
2
– HDMI OUT 2
3
– HDMI OUT 3
4
– HDMI OUT 4
5
– HDMI OUT 5
6
– HDMI OUT 6
7
– HDMI OUT 7
8
– HDMI OUT 8
status
– HPD status according to
signal validation
0
– Signal or sink is not valid
1
– Signal or sink is valid
2
– Sink and EDID is valid
Get the output HPD status of
HDMI OUT 1:
#DISPLAY?
1
<CR>
DPSW-
STATUS?
N/A
Get the DIP-switch
state.
COMMAND
#DPSW-STATUS?
dip_id
<CR>
FEEDBACK
~nn@DPSW-STATUS
dip_id
,
status
<CR><LF>
dip_id
– 1 to 8 (number of DIP
switches)
status
– Up/down
0
– Up
1
– Down
get the DIP-switch 2 status:
#DPSW-STATUS?
2
<CR>
ETH-PORT
Set Ethernet port
protocol.
If the port number
you enter is already in
use, an error is
returned.
The port number must
be within the following
range: 0-(2^16-1).
COMMAND
#ETH-PORT
port_type
,
port_id
<CR>
FEEDBACK
~nn@ETH-PORT
port_type
,
port_id
<CR><LF>
port_type
– TCP/UDP
port_id
– TCP/UDP port number
(2000
– 65535)
Set the Ethernet port protocol
for TCP to port 12457:
#ETH-PORT
0
,
12457
<CR>