![background image](http://html1.mh-extra.com/html/kramer/vs-88h2a/vs-88h2a_user-manual_2001441076.webp)
Kramer Electronics Ltd.
VS-88H2A
– Protocol 3000
74
Function
Description
Syntax
Parameters/Attributes
Example
NET-GATE
Set gateway IP.
A network gateway
connects the device
via another network
and maybe over the
Internet. Be careful of
security issues. For
proper settings consult
your network
administrator.
COMMAND
#NET-GATE
ip_address
<CR>
FEEDBACK
~nn@NET-GATE
ip_address
<CR><LF>
ip_address
– Format:
xxx.xxx.xxx.xxx
Set the gateway IP address to
192.168.0.1:
#NET-
GATE
192
.
168
.
000
.
001
<CR
>
NET-GATE?
Get gateway IP.
A network gateway
connects the device
via another network
and maybe over the
Internet. Be aware of
security problems.
COMMAND
#NET-GATE?
<CR>
FEEDBACK
~nn@NET-GATE
ip_address
<CR><LF>
ip_address
– Format:
xxx.xxx.xxx.xxx
Get the gateway IP address:
#NET-GATE?
<CR>
NET-IP
Set IP address.
For proper settings
consult your network
administrator.
COMMAND
#NET-IP
ip_address
<CR>
FEEDBACK
~nn@NET-IP
ip_address
<CR><LF>
ip_address
– Format:
xxx.xxx.xxx.xxx
Set the IP address to
192.168.1.39:
#NET-
IP
192
.
168
.
001
.
039
<CR>
NET-IP?
Get IP address.
COMMAND
#NET-IP?
<CR>
FEEDBACK
~nn@NET-IP
ip_address
<CR><LF>
ip_address
– Format:
xxx.xxx.xxx.xxx
Get the IP address:
#NET-IP?
<CR>
NET-MAC?
Get MAC address.
For backward
compatibility, the
id
parameter can be
omitted. In this case,
the Network ID, by
default, is 0, which is
the Ethernet control
port.
COMMAND
#NET-MAC?
<CR>
FEEDBACK
~nn@NET-MAC
mac_address
<CR><LF>
mac_address
– Unique MAC
address. Format: XX-XX-XX-XX-XX-
XX where X is hex digit
#NET-MAC?
<CR>
NET-MASK
Set subnet mask.
For proper settings
consult your network
administrator.
COMMAND
#NET-MASK
net_mask
<CR>
FEEDBACK
~nn@NET-MASK
net_mask
<CR><LF>
net_mask
– Format:
xxx.xxx.xxx.xxx
Set the subnet mask to
255.255.0.0:
#NET-
MASK
255
.
255
.
000
.
000
<CR
>
NET-MASK?
Get subnet mask.
COMMAND
#NET-MASK?
<CR>
FEEDBACK
~nn@NET-MASK
net_mask
<CR><LF>
net_mask
– Format:
xxx.xxx.xxx.xxx
Get the subnet mask:
#NET-MASK?
<CR>
PASS
Set password for login
level.
The default
password is an empty
string.
COMMAND
#PASS
login_level
,
password
<CR>
FEEDBACK
~nn@PASS
login_level
,
password
<CR><LF>
login_level
– Level of login to
set (End User or Admin):
0
– User
1
– Admin
password
– Password for the
login_level
. Up to 15 printable ASCII
chars
Set the password for the
Admin protocol permission
level to 33333:
#PASS
admin
,
33333
<CR>
PASS?
Get password for login
level.
The default
password is an empty
string.
COMMAND
#PASS?
login_level
<CR>
FEEDBACK
~nn@PASS
login_level
,
password
<CR><LF>
login_level
– Level of login to
set (User or Admin):
0
– User
1
– Admin
password
– Password for the
login_level
. Up to 15 printable ASCII
chars
Get the password for the
Admin protocol permission
level:
#PASS?
admin
<CR>
PROG-
ACTION
Set Step-In button
action bitmap.
Programs matrix
action as a response
for external event
(programmable button
pressed).
COMMAND
#PROG-ACTION
port_type
,
port_id
,
button_id
,
bitmap_actions_i
d
<CR>
FEEDBACK
~nn@PROG-ACTION
port_type
,
port_id
,
button_id
,
bitmap_action
s_id
<CR><LF>
io_mode
– Input
0
– Input
port_id
– input number on the
device:
1
– HDMI IN 1
2
– HDMI IN 2
3
– HDMI IN 3
4
– HDMI IN 4
5
– HDMI IN 5
6
– HDMI IN 6
7
– HDMI IN 7
8
– HDMI IN 8
button_id
– External
programmable button ID
bitmap_actions_id
– Bitmap
representing
actions to perform after
receiving button_id. format:
XXXX…X, where X is a hex digit.
The binary form of every hex digit
represents actions from the table
0
– Echo to controller
1
– Step-in out 1
2
– Step-in out 2
3
– Step-in out 3
4
– Step-in out 4
5
– Step-in out 5
6
– Step-in out 6
7
– Step-in out 7
8
– Step-in out 8
Setting ‘1’ says that the
corresponding action must be
executed.
Set step-in button actions on
input 3:
#PROG-
ACTION
0,3,1,0x07
<CR>