![background image](http://html1.mh-extra.com/html/kramer/vs-88h2a/vs-88h2a_user-manual_2001441018.webp)
Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
16
3. Press an
IN (PATTERN)
button (1 to 8).
The selected audio input is switched to the selected output (or to all the outputs if
ALL
was pressed instead) and the 7-segment display shows the current status.
To switch the analog audio and video signals together to an output:
1. Press
A-AUDIO
and
VIDEO
simultaneously.
The buttons illuminate and the 7-segment display
shows the current IN-OUT video
status.
2. Press an
OUT (MUTE)
button (1 to 8).
The 7-segment display LED, under the selected output, flashes.
Press
ALL
(instead of an output button) to route the selected input to all the outputs. All
the 7-segment display LEDs flash.
3. Press an
IN (PATTERN)
button (1 to 8).
The selected audio input is switched to the selected output (or to all the outputs if
ALL
was pressed instead) and the 7-segment display shows the current status.
Muting/Unmuting an Output
You can mute/unmute an audio signal and a video signal separately.
To mute/unmute an audio signal:
1. Press
A-AUDIO
or
D-AUDIO
.
The buttons illuminate.
2. Press an
OUT (MUTE)
button (1 to 8).
Press
ALL
(instead of an output button) to mute/unmute all the outputs. All the
7-segment display LEDs flash.
3. Press
MUTE/PATTERN
to mute/unmute the output.
The muted output appears as “
0
” on the 7-segment display.
To mute/unmute a video signal:
1. Press
VIDEO
.
The button illuminates and the 7-segment display
shows the current IN-OUT video
status.
2. Press an
OUT (MUTE)
button (1 to 8).
The 7-segment display LED, under the selected output, flashes.
Press
ALL
(instead of an output button) to mute/unmute all the outputs. All the
7-segment display LEDs flash.
3. Press
MUTE/PATTERN
to mute/unmute the output.
The
muted output appears as “
0
” on the 7-segment display.