![background image](http://html1.mh-extra.com/html/kramer/vs-88h2a/vs-88h2a_user-manual_2001441015.webp)
Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
13
When switching you can also press:
▪
An output button (1 to 8) and then
OUT (MUTE)
to mute the selected output (turns 0).
▪
ALL
(instead of an output button) and then an input button to route the selected input
to all the outputs.
All the 7-segment display LEDs flash and then display the selected input.
To switch an analog audio input to an analog output:
1. Press
A-AUDIO
twice.
The button flashes (analog audio input to balanced audio output mode) and the
7-segment display
shows the current IN-OUT analog audio status.
On the front panel buttons:
•
An illuminated input button means that a cable is connected to the 3.5mm minijack.
•
An illuminated output button means that a display that supports audio is detected on
that output.
•
A dark button means either that the display that is connected does not support audio
or that a display is not connected at all.
On the 7-segment display:
•
“
d
” under an output number indicates that an embedded digital audio is currently
routed to that output.
•
“
C
” under an output number indicates that ARC audio is routed to that output.
•
“
0
” under an output number indicates that the analog audio output is muted.
•
“.” under an output number indicates that the HDMI output port is in ARC mode.
•
Any digit shows the analog audio input switching state.
2. While
A-AUDIO
flashes, select an output button (for example, 8) and then an input
button (for example, 1). Analog input 1 is routed to balanced stereo audio output 8 and
on the 7-segment display, INPUT 1 appears under OUTPUT 8.
When switching you can also press:
▪
An output button (1 to 8) and then
OUT (MUTE)
to mute the selected output (turns 0).
▪
ALL
(instead of an output button) and then an input button to route the selected input
to all the outputs.
All the 7-segment display LEDs flash and then display the selected input.