Kramer Electronics Ltd.
VS-88H2A
– Operating VS-88H2A via Front Panel Buttons
23
4. Press an input button (for example IN 6) to select the analog audio input that will be
routed to the input destination port.
The flashing 7-segment display LED shows the selected input number and
after selecting the HDMI audio IN the port number appears (6).
An analog audio input is routed to an HDMI input.
Storing and Recalling a Setup
VS-88H2A
can store up to 16 setups. Each setup includes the video and audio current
switching state, the output audio volume and balance, the EDID, the ARC/audio mode, and
the switch mode and speed.
In Store-Recall mode, OUT 1 corresponds to setup 1, IN 1 corresponds to setup 9, and so on.
Figure 7: VS-88H2A 4K HDMI 8x8 Matrix Switcher Front Panel
To store a setup:
1. Press
STO
.
The
STO
button illuminates.
2. Press an
IN
or an
OUT
button (from 1 to 8).
For example, when pressing IN 5, the current device state is stored to setup 13.
3. Press
STO
.
The current device state is stored to setup 13 and the STO button no longer illuminates.
A setup is stored.
To recall a setup:
1. Press
RCL
.
The
RCL
button illuminates.
2. Press an
IN
or
OUT
button to recall the setup stored in that IN/OUT.
The selected button flashes.
If a setup is stored in the selected setup button, the corresponding 7-segment display LED
flashes. If nothing is stored the 7-segment LED is on.
3. Press
RCL
.
The recalled setup is applied and the RCL button no longer illuminates.
You need to press
RCL
within 10 seconds, to apply settings.
A setup is recalled.
