Kramer Electronics Ltd.
VS-88UT
– Protocol 3000
96
Function
Description
Syntax
Parameters/Attributes
Example
PORTS-LIST?
Get the port list of this
machine.
The response is
returned in one line and
terminated with
<CR><LF>.
The response format lists
port IDs separated by
commas.
This is an Extended
Protocol 3000 command.
COMMAND
#PORTS-LIST?
<CR>
FEEDBACK
~nn@PORTS-LIST
[<direction_type>
.
<port_type>
.
<port_index>
,
..,
]
<CR><LF>
The following attributes comprise the
port ID:
▪
<direction_type>
–
o
IN
o
OUT
o
BOTH
▪
<port_type>
–
o
HDMI
o
HDBT
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
STEPIN
o
MIC
o
RS-232
o
IR
o
USB_A
o
USB_B
▪
<port_index>
– The port
number as printed on the rear
panel
Get the ports list:
#PORTS-LIST?
<CR>
PROT-VER?
Get device protocol
version.
COMMAND
#PROT-VER?
<CR>
FEEDBACK
~nn@PROT-VER
3000:version
<CR><LF>
version
– XX.XX where X is a
decimal digit
Get the device protocol
version:
#PROT-VER?
<CR>
RESET
Reset device.
To avoid locking the
port due to a USB bug in
Windows, disconnect
USB connections
immediately after running
this command. If the port
was locked, disconnect
and reconnect the cable
to reopen the port.
COMMAND
#RESET
<CR>
FEEDBACK
~nn@RESET
OK
<CR><LF>
Reset the device:
#RESET
<CR>
SIGNAL?
Get input signal status.
COMMAND
#SIGNAL?
inp_id
<CR>
FEEDBACK
~nn@SIGNAL
inp_id
,
status
<CR><LF>
inp_id
– Input number
1
– Input 1
2
– Input 2
3
– Input 3
4
– Input 4
5
– Input 5
6
– Input 6
7
– Input 7
8
– Input 8
status
– Signal status according to
signal validation:
0
– Off
1
– On
Get the input signal status of
IN 1:
#SIGNAL?
1
<CR>
SIGNALS-
LIST?
Get signal ID list of this
machine.
The response is
returned in one line and
terminated with
<CR><LF>.
The response format lists
signal IDs separated by
commas.
This is an Extended
Protocol 3000 command.
COMMAND
#SIGNALS-LIST?
<CR><LF>
FEEDBACK
~nn@SIGNALS-LIST
[<direction_type>
.
<port_type>
.
<port_index
>
.
<signal_type>
.
<index>
,..,
]
<CR><LF>
The following attributes comprise the
signal ID:
▪
<direction_type>
–
o
IN
o
OUT
o
BOTH
▪
<port_type>
–
o
HDMI
o
HDBT
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
STEPIN
o
MIC
o
RS-232
o
IR
o
USB_A
o
USB_B
▪
<port_index>
– The port
number as printed on the front or
rear panel
▪
<signal_type>
–
o
VIDEO
o
AUDIO
o
RS232
o
IR
o
USB
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same
type
Get signal ID list:
#SIGNALS-LIST?
<CR>
SN?
Get device serial
number.
COMMAND
#SN?
<CR>
FEEDBACK
~nn@SN
serial_number
<CR><LF>
serial_number
– 14 decimal
digits, factory assigned
Get the device serial number:
#SN?
<CR>
VERSION?
Get firmware version
number.
COMMAND
#VERSION?
<CR>
FEEDBACK
~nn@VERSION
firmware_version
<CR><LF>
firmware_version
– XX.XX.XXXX
where the digit groups are:
major.minor.build version
Get the device firmware
version number:
#VERSION?
<CR>