Kramer Electronics Ltd.
VS-88UT
– Routing VS-88UT Ports
33
Figure 34: Routing Settings Page
– Separate Audio Routing
Routing A/V Signals in the Audio-Follow-Video and Breakaway Modes
By default, all the outputs are set to the Audio-Follow-Video mode (AFV) mode
. When
routing an input to an output or only a video signal to an output, both audio and video signals
appear on the output (see
Setting the HDMI and HDBT Output Parameters
).
Click the AFV icon to toggle between
(AFV) and
(Breakaway) modes.
To route an input to an output in the breakaway mode:
•
Click
Routing Settings
page. The Routing Matrix page opens.
•
Click
on an output (HDMI 3 in this example).
The AFV icon is deselected and that output is now in the Breakaway mode.
•
Click
+
beside the HDMI 1 input port name.
•
Click Video Input 1 to output 3
The audio signal no longer follows the video signal, therefore when routing a video
signal, the audio signal does not follow.
Figure 35: Routing Settings Page
– Routing the Video Signal Only