![background image](http://html1.mh-extra.com/html/kramer/vs-84ut/vs-84ut_user-manual_2001428084.webp)
Kramer Electronics Ltd.
VS-88UT
– Changing the Device Settings
82
Changing the Ethernet Settings
The Communication tab shows the device details, such as IP Address, Mask, MAC address
and so on, and enables changing them.
To change the Ethernet settings:
1. In the Navigation pane, click
Settings
. The General tab in the Settings page appears.
2. Select the Communication tab:
Figure 113: Settings Page
– Communication Tab
3. If DHCP is set to OFF, change any of the parameters (IP Address, Netmask and/or
Gateway).
4. If required, change the TCP port number.
5. Click
Save
.
After changing the IP address, reload the Web page with the new IP address.
If DHCP is checked, reload the Web page with the new IP address (see below).