Kramer VS-84UT, User Manual

Page: 97 / 110

Kramer Electronics Ltd.
VS-88UT
– Protocol 3000
95
Function Description Syntax Parameters/Attributes Example
NET-DHCP?
Get DHCP mode.
For Backward
compatibility, the
id
parameter can be
omitted. In this case, the
Network ID, by default, is
0, which is the Ethernet
control port.
COMMAND
#NET-DHCP?

id <CR>
FEEDBACK
~nn@NET-DHCP

id , mode <CR><LF>
id
– Network ID–the device network
interface (if there are more than one).
Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
mode –
0
– Do not use DHCP. Use the IP
set by the factory or using the
NET-IP
or
NET-CONFIG
command.
1
– Try to use DHCP. If unavailable,
use the IP set by the factory or
using the
NET-IP
or
NET-
CONFIG
command.
Get DHCP mode for port 1:
#NET-DHCP?

1 <CR>
NET-DNS?
Get DNS name server.
There is no “Set”
command. Use NET-
CONFIG to set up
network, including DNS
name servers.
If dns_id is out of the
defined DNS range, Error
Code #3
(ERR_PARAMETER_OU
T_OF_RANGE) is
returned.
If no dns_id is defined,
Error Code #3 is returned
for any dns_id.
COMMAND
#NET-DNS?

dns_id <CR>
FEEDBACK
~nn@NET-DNS

dns_id , ip <CR><LF>
dns_id
– ID of the DNS name server
to retrieve, indexing starts at “0”
Iip – IP address of the DNS server
Get DNS name server:
#NET-DNS?

<CR>
NET-GATE
Set gateway IP.
A network gateway
connects the device via
another network and
maybe over the Internet.
Be careful of security
issues. For proper
settings consult your
network administrator.
COMMAND
#NET-GATE  ip_address <CR>
FEEDBACK
~nn@NET-GATE

ip_address <CR><LF>
ip_address – Format:
xxx.xxx.xxx.xxx
Set the gateway IP address to
192.168.0.1:
#NET-
GATE

192 . 168 . 000 . 001 <CR
>
NET-GATE? Get gateway IP.
A network gateway
connects the device via
another network and
maybe over the Internet.
Be aware of security
problems.
COMMAND
#NET-GATE?  <CR>
FEEDBACK
~nn@NET-GATE

ip_address <CR><LF>
ip_address
– Format:
xxx.xxx.xxx.xxx
Get the gateway IP address:
#NET-GATE?  <CR>
NET-IP
Set IP address.
For proper settings
consult your network
administrator.
COMMAND
#NET-IP

ip_address <CR>
FEEDBACK
~nn@NET-IP

ip_address <CR><LF>
ip_address – Format:
xxx.xxx.xxx.xxx
Set the IP address to
192.168.1.39:
#NET-
IP

192 . 168 . 001 . 039 <CR>
NET-IP?
Get IP address. COMMAND
#NET-IP?

<CR>
FEEDBACK
~nn@NET-IP

ip_address <CR><LF>
ip_address – Format:
xxx.xxx.xxx.xxx
Get the IP address:
#NET-IP?

<CR>
NET-MAC?
Get MAC address.
For backward
compatibility, the
id
parameter can be
omitted. In this case, the
Network ID, by default, is
0, which is the Ethernet
control port.
COMMAND
#NET-MAC?

id <CR>
FEEDBACK
~nn@NET-MAC

id , mac_address <CR><LF>
id – Network ID–the device network
interface (if there are more than one).
Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
mac_address
– Unique MAC
address. Format: XX-XX-XX-XX-XX-
XX where X is hex digit
#NET-MAC?

id <CR>
NET-MASK Set subnet mask.
For proper settings
consult your network
administrator.
COMMAND
#NET-MASK

net_mask <CR>
FEEDBACK
~nn@NET-MASK

net_mask <CR><LF>
net_mask
– Format: xxx.xxx.xxx.xxx
Set the subnet mask to
255.255.0.0:
#NET-
MASK
 255 . 255 . 000 . 000 <CR
>
NET-MASK? Get subnet mask. COMMAND
#NET-MASK?

<CR>
FEEDBACK
~nn@NET-MASK

net_mask <CR><LF>
net_mask
– Format: xxx.xxx.xxx.xxx
Get the subnet mask:
#NET-MASK? <CR>
PASS
Set password for login
level.
The default password
is an empty string.
COMMAND
#PASS

login_level , password <CR>
FEEDBACK
~nn@PASS  login_level , password <CR><LF>
login_level – Level of login to set
(End User or Administrator).
password
– Password for the
login_level . Up to 15 printable ASCII
chars
Set the password for the
Admin protocol permission
level to 33333:
#PASS

Admin , 33333 <CR>
PASS? Get password for login
level.
The default password
is an empty string.
COMMAND
#PASS?

login_level <CR>
FEEDBACK
~nn@PASS

login_level , password <CR><LF>
login_level
– Level of login to set
(End User or Administrator).
password
– Password for the
login_level . Up to 15 printable ASCII
chars
Get the password for the
Admin protocol permission
level:
#PASS?  Admin <CR>