Kramer Electronics Ltd.
VS-88UT
– Protocol 3000
94
Function
Description
Syntax
Parameters/Attributes
Example
NAME
Set machine (DNS)
name.
The machine name is
not the same as the
model name. The
machine name is used to
identify a specific
machine or a network in
use (with DNS feature
on).
COMMAND
#NAME
machine_name
<CR>
FEEDBACK
~nn@NAME
machine_name
<CR><LF>
machine_name
– String of up to 15
alpha-numeric chars (can include
hyphen, not at the beginning or end)
Set the DNS name of the
device to room-442:
#NAME
room-442
<CR>
NAME?
Get machine (DNS)
name.
The machine name is
not the same as the
model name. The
machine name is used to
identify a specific
machine or a network in
use (with DNS feature
on).
COMMAND
#NAME?
<CR>
FEEDBACK
~nn@NAME
machine_name
<CR><LF>
machine_name
– String of up to 15
alpha-numeric chars (can include
hyphen, not at the beginning or end)
Get the DNS name of the
device:
#NAME?
<CR>
NAME-RST
Reset machine (DNS)
name to factory default.
Factory default of
machine (DNS) name is
“KRAMER_” + 4 last
digits of device serial
number.
COMMAND
#NAME-RST
<CR>
FEEDBACK
~nn@NAME-RST
OK
<CR><LF>
Reset the machine name (S/N
last digits are 0102):
#NAME-
RST
KRAMER_0102
<CR>
NET-CONFIG
Set a network
configuration.
Parameters,
[DNS1]
and
[DNS2]
are optional.
For Backward
compatibility, the
id
parameter can be
omitted. In this case, the
Network ID, by default, is
0, which is the Ethernet
control port.
If the gateway
address is not compliant
to the subnet mask used
for the host IP, the
command will return an
error. Subnet and
gateway compliancy
specified by RFC950.
COMMAND
#NET-CONFIG
id
,
ip
,
net_mask
,
gateway
,
[DNS1]
,
[DNS2]
<CR>
FEEDBACK
~nn@NET-CONFIG
id
,
ip
,
net_mask
,
gateway
<CR><LF>
id
– Network ID–the device network
interface (if there are more than one).
Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
ip
– Network IP
net_mask
– Network mask
gateway
– Network gateway
Set the device network
parameters to IP address
192.168.113.10, net mask
255.255.0.0, and gateway
192.168.0.1:
#NET-CONFIG
0
,
192
.
168
.
1
13
.
10
,
255
.
255
.
0
.
0
,
192
.
1
68
.
0
.
1
<CR>
NET-CONFIG?
Get a network
configuration.
COMMAND
#NET-CONFIG?
id
<CR>
FEEDBACK
~nn@NET-CONFIG
id
,
ip
,
net_mask
,
gateway
<CR><LF>
id
– Network ID–the device network
interface (if there are more than one).
Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
ip
– Network IP
net_mask
– Network mask
gateway
– Network gateway
Get network configuration:
#NET-CONFIG?
id
<CR>
NET-DHCP
Set DHCP mode.
Only 1 is relevant for
the mode value. To
disable DHCP, the user
must configure a static IP
address for the device.
Connecting Ethernet to
devices with DHCP may
take more time in some
networks.
To connect with a
randomly assigned IP by
DHCP, specify the device
DNS name (if available)
using the
NAME
command. You can also
get an assigned IP by
direct connection to USB
or RS-232 protocol port, if
available.
For proper settings
consult your network
administrator.
For Backward
compatibility, the
id
parameter can be
omitted. In this case, the
Network ID, by default, is
0, which is the Ethernet
control port.
COMMAND
#NET-DHCP
id
,
mode
<CR>
FEEDBACK
~nn@NET-DHCP
id
,
mode
<CR><LF>
id
– Network ID–the device network
interface (if there are more than one).
Counting is 0 based, meaning the
control port is ‘0’, additional ports are
1,2,3….
mode
–
1
– Try to use DHCP. (If
unavailable, use the IP address
set by the factory or the
NET-IP
command).
Enable DHCP mode for port 1,
if available:
#NET-DHCP
1
,
1
<CR>