Kramer Electronics Ltd.
VS-88UT
– Protocol 3000
93
Function
Description
Syntax
Parameters/Attributes
Example
HDCP-STAT?
Get HDCP signal status.
Output stage (1)
– get
the HDCP signal status of
the sink device connected
to the specified output.
Input stage (
0
)
– get the
HDCP signal status of the
source device connected
to the specified input.
COMMAND
#HDCP-STAT?
stage
,
stage_id
<CR>
FEEDBACK
~nn@HDCP-STAT
stage
,
stage_id
,
status
<CR><LF>
stage
– Input/Output
0
– Input
1
– Output
stage_id
– Number of chosen stage
for the input stage
1
– Input 1
2
– Input 2
3
– Input 2
4
– Input 4
5
– Input 5
6
– Input 6
7
– Input 7
8
– Input 8
For the output stage
1
– Output 1
2
– Output 2
3
– Output 3
4
– Output 4
5
– Output 5
6
– Output 6
7
– Output 7
8
– Output 8
status
– Signal encryption status -
valid values On/Off
0
– HDCP Off
1
– HDCP On
Get the output HDCP-STATUS
of IN 1:
#HDCP-STAT?
0
,
1
<CR>
HELP
Get command list or help
for specific command.
COMMAND
#HELP
<CR>
#HELP
command_name
<CR>
FEEDBACK
1. Multi-line:
~nn@Device
command
,
command…
<CR><LF>
To get help for command use: HELP (COMMAND_NAME)
<CR><LF>
~nn@HELP
command:
<CR><LF>
description
<CR><LF>
USAGE:usage
<CR><LF>
command
– Name of a specific
command
Get the command list:
#HELP
<CR>
To get help for
AV-SW-TIMEOUT:
HELP
AV-SW-TIMEOUT
<CR>
LOG-TAIL?
Get the last “n” lines of
message logs.
Used for advanced
troubleshooting. Helps
find error root causes and
gets details not displayed
in the error code number.
COMMAND
#LOG-TAIL?
line_num
<CR>
FEEDBACK
Get:
~nn@LOG-TAILnn
<CR><LF>
Line content #1
<CR><LF>
Line content #2
<CR><LF>
Etc...
Line_num
– Optional, default
line_num
is 10
Get the last "2" lines of
message logs:
#LOG-TAIL?
2
<CR>
MATRIX-
STATUS?
Get routing status of all
output ports.
This syntax uses the
new convention of using
brackets to define a list of
fields “[ ]”.
COMMAND
#MATRIX-STATUS?
<CR>
FEEDBACK
Multi-line:
~nn@MATRIX-STATUS
[[<direction_type1>
.
<port_type1>
.
<port_i
ndex1>
.
<signal_type1>
.
<index1>
,
[[<direction_type2>
.
<port_t
ype2>
.
<port_index2>
.
<signal_type2>
.
<index2>]
,..
]
<CR><LF>
The following attributes comprise the
output signal ID (suffix 1) and input
signal ID (suffix 2 or greater):
▪
<direction_type>
– IN
▪
<port_type>
–
o
HDMI
o
HDBT
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
MIC
o
RS-232
o
IR
o
USB_A
o
USB_B
▪
<port_index>
– The port
number as printed on the front or
rear panel
▪
<signal_type>
–
o
VIDEO
o
AUDIO
o
RS232
o
IR
o
USB_A
o
USB_B
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same
type
Get the room controller current
matrix state:
#MATRIX-STATUS?
<CR>
MODEL?
Get device model.
This command
identifies equipment
connected to
VS-88UT
and notifies of identity
changes to the connected
equipment. The Matrix
saves this data in
memory to answer
REMOTE-INFO requests.
COMMAND
#MODEL?
<CR>
FEEDBACK
~nn@MODEL
model_name
<CR><LF>
model_name
– String of up to 19
printable ASCII chars
Get the device model:
#MODEL?
<CR>