Kramer VS-84UT, User Manual

Page: 32 / 110

Kramer Electronics Ltd.
VS-88UT
– Routing VS-88UT Ports
30
Hover over a port to view its switching status (HDMI 3 audio and video inputs are routed to
HDMI 1 and HDMI 2 outputs):
Figure 30: Routing Settings Page
– Viewing the Switching Status
In the same way, you can route all the port types in the matrix if connected by a routing
button.
To define each of the ports in the matrix and perform advanced routing operations, see
Defining Port Settings on page 30 .
Defining Port Settings
This section describes how to route the ports (audio, video, RS-232, IR and USB) in the
matrix and define the port settings.
The Routing Settings page enables the following:
•
Setting Input HDMI Port Parameters on page 31 .
•
Setting Input HDBT/HDMI or HDBT Input Port Parameters on page 39 .
•
Setting Analog Audio Input Port Parameters on page 46 .
•
Setting the HDMI and HDBT Output Parameters on page 51 .
•
Setting Analog and Amplified Audio Output Parameters on page 55 .
•
Setting and Routing the RS-232 Ports on page 56 .
•
Setting and Routing IR Ports on page 58 .
•
Setting and Routing the USB Ports on page 58 .
While almost all the VS-88UT port settings examples also apply to VS-84UT (even though
the number of inputs and outputs may be different) there are some exceptions which are
described separately throughout this section.