![background image](http://html1.mh-extra.com/html/kramer/vs-84ut/vs-84ut_user-manual_2001428056.webp)
Kramer Electronics Ltd.
VS-88UT
– Routing VS-88UT Ports
54
Auto Switching Feature
For HDMI and HDBT outputs set
Auto Switching
to
Manual
(the default),
Priority
or
Last
Connected
.
In both Last Connected and Priority modes, when the input signal sync is lost (but the cable is not
removed) there is a default delay (see
) before another input is
automatically selected. When an input cable is removed, there is a delay before automatic switching
takes place.
In the Manual mode Video Lost timeouts are disabled.
To use Auto Switching:
1. Open the HDMI/HDBT settings window.
2. If Auto Switching is set to Priority or Last Connected, you can do the following:
▪
Drag and drop an input to set the priority order:
Figure 74: Routing Settings Page
–Priority Setup
▪
Delete input/s to exclude them from the priority list.
To add a deleted input, click
Add an Input
drop-down list and select the input/s.
Figure 75: Routing Settings Page
– HDMI/HDBT Priority List
3. Click
Save
.