Kramer Electronics Ltd.
VS-88UT
– Defining the VS-88UT and VS-84UT
7
#
Feature
Function
Matrix Functionality
REMOTE MUTE 2-pin Terminal
Block Connector
Remote switch to mute all video and audio signals. Enables easy
integration of the audio system with a PA system, usually used
for alarms or other public audio messages.
GPIO 5-pin Terminal Block
Connectors
For future use.
PROGRAM DIP-switches
For future use.
Power Connector with Switch
and Fuse
AC connector, enabling power supply to the unit.
Power switch for turning the unit on or off.
AUDIO
INPUT (MIC/line)
5-pin Terminal
Block Connectors
Connect to stereo audio balanced sources (from 1 to 4) and/or
microphone inputs (from 1 to 8).
INPUT 3.5mm
Mini Jack
Connect to an unbalanced audio source (from 5 to 8).
LINE OUT 5-pin
Terminal Block
Connectors
Connect to a stereo balanced audio acceptor (1 and 2).
POWER AMP
OUT 4-pin
Terminal Block
Connectors
Connect to a pair of loudspeakers.
VIDEO
HDMI IN
Connector
VS-88UT
: connect to an HDMI source (from 1 to 4).
VS-84UT
: connect to an HDMI source (from 1 to 6).
HDMI IN
—HDBT
IN Connectors
VS-88UT
: connect a source to the HDMI IN 5 and/or HDMI IN 6
inputs, or connect a transmitter to the HDBT IN (5) and/or HDBT
IN (6) inputs. The same applies to the HDMI IN 7/8 and HDBT IN
(7)/(8) pairs. For each input pair (HDMI or HDBT), only one type of
connector can be enabled (via the Routing Settings Web page);
by default, the HDBT pair is active. The HDBT Transmitter (for
example, the Kramer
TP-590Txr
) can pass audio and video
signals as well as USB, Ethernet, power and serial commands.
HDBT IN
Connectors
VS-84UT
: connect to an HDBT transmitter (from (7) to (8)).
HDMI OUT
Connectors
VS-88UT
: connect to an HDMI acceptor (1, 2, 3, 4, 7 and 8).
VS-84UT
: connect to an HDMI acceptor (1 to 2).
OUT (HDBT)
Connectors
VS-88UT
: connect OUT 5 and/or OUT 6 to HDBT receivers (for
example, the Kramer
TP-590Rxr
) to pass audio and video signals
as well as USB, Ethernet, power and serial commands.
HDBT OUT
Connectors
VS-84UT
: connect to HDBT receivers (for example, the Kramer
TP-590Rxr
) to pass audio and video signals as well as USB,
Ethernet, power and serial commands.
HDBT IR
3.5mm Mini
Jack
IN
VS-88UT
: connect to an external IR sensor to send IR signals (5,
6, 7 and 8) via HDBT inputs 5, 6, 7 and 8 respectively.
VS-84UT
: connect to an external IR sensor to send IR signals (7
and 8) via HDBT inputs 7 and 8 respectively.
OUT
VS-88UT
: connect to an external IR emitter to receive IR signals
(5 and 6) via HDBT outputs 5 and 6, respectively.
VS-84UT
: connect to an external IR emitter to receive IR signals
(3 and 4) via HDBT outputs 3 and 4, respectively.
RS-232 HDBT DATA Terminal
Block Connectors (G, Rx, Tx)
Connect to the PC or the remote controller and pass data
between this RS-232 port and the HDBT OUT ports or one of the
HDBT IN ports.
RS-232 CONTROL Port
Terminal Block Connectors (G,
Rx, Tx)
Connect to the PC or the remote controller to control the
VS-88UT
via Protocol 3000 commands.