![background image](http://html.mh-extra.com/html/kramer/vs-3232dn-em/vs-3232dn-em_user-manual_2001322107.webp)
Kramer Electronics Ltd.
VS-3232DN-EM
– Protocol 3000
104
GEDID-EXT
Functions
Permission
Transparency
Set
GEDID-EXT
End User
Public
Get
-
-
-
Description
Syntax
Set
Read EDID data from external device connected to an
output
#
GEDID
SPout
_id
CR
Get
-
-
Response
Multi-line response:
~nn@
GEDID-EXT
SP
out_id,size
CR LF
EDID_dataCR LF
~nn@
GEDID-EXT
SP
out_id
SP
OK
CR LF
Parameters
out_id
– Output port EEPROM ID from which to get the EDID:
1-32
(varies according to installed output
size
–
EDID data size sent from the device
Edid_data
– EDID data, as byte stream)
Response Trigger
Response is sent to the com port from which the Set (before execution) command was received
Notes
K-Config Example
Read EDID data from a device connected to Output 5:
“#GEDID
-
EXT 5”,0x0D
HDCP-MOD
Functions
Permission
Transparency
Set
HDCP-MOD
Administrator
Public
Get
HDCP-MOD?
End User
Public
Description
Syntax
Set
Set HDCP mode
#
HDCP-MOD
SP
inp_id,mode
CR
Get
Get HDCP mode
#
HDCP-MOD?
SP
inp_id
CR
Response
Set / Get:
~nn@
HDCP-MOD
SP
inp_id,mode
CR LF
Parameters
inp_id
– input number:
1-32
(varies according to installed input cards, see
mode
–
HDCP mode:
0
(HDCP Off),
1
(HDCP On),
2
(Follow input),
3
(Mirror output
– MAC mode)
Response Trigger
A response is sent to the com port from which the set (before execution) / get command was received
A response is sent to all com ports after command execution if
HDCP-MOD
was set by any other external
control device (device button, device menu or other) or if the HDCP mode changed
Notes
Set HDCP working mode on the device input:
HDCP not supported - HDCP Off
HDCP support changes following detected sink - MIRROR OUTPUT
K-Config Example
Disable HDCP mode on input 3:
“#HDCP
-
MOD 3,0”,0x0D