![background image](http://html.mh-extra.com/html/kramer/vs-3232dn-em/vs-3232dn-em_user-manual_2001322059.webp)
Kramer Electronics Ltd.
VS-3232DN-EM
– Using the Input / Output Cards
56
Defining the DGKat-IN4-F32 / DGKat-OUT4-F32
The
DGKat-IN4-F32
is a 4-Input HDMI & RS-232 over DGKat Card (F-32):
The
DGKat-OUT4-F32
is a 4-Output HDMI & RS-232 over DGKat Card (F-32):
DGKat-IN4-F32 / DGKat-OUT4-F32 Configuration
The
DGKat-IN4-F32
configuration table appears as follows:
DGKat-IN4-F32 Input Card
Parameter
Description
Default
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS.
0
The
DGKat-OUT4-F32
configuration table appears as follows:
DGKat-OUT4-F32 Output Card
Parameter
Description
Default
HDMI
Sets the output signal format (Display, HDMI, DVI).
Display
—the output is set automatically based on the EDID of the connected
display.
HDMI
—Force the output to be HDMI.
DVI
—Force the output to be DVI.
Note
: When selecting the DVI option and fast switching is enabled, you must
ensure that the source is DVI compatible.
Display
Deep Color
Sets maximum color bit depth (Auto, 8 bit).
Auto
—Set the color depth automatically.
8 bit
—Limit the color depth to 8 bits.
Note
: Deep color on DGKat is not supported at higher resolutions (1080p
@50/60Hz or WUXGA). When setting deep color to on, ensure that the
resolution does not exceed the DGKat maximum data rate of 4.95Gbps
(1.65Gbps per graphic channel).
Auto
Switch
Speed
When switching between different sources the switching time can be reduced
by setting the fast switch level (Ex-fast Switch, Fast Switch or Normal Switch).
Normal
Switch
DGKat-IN4-F32 / DGKat-OUT4-F32 Technical Specifications
DGKat cards must be used with shielded twisted pair cables with RJ-45 connections, such as
the Kramer
BC-UNIKAT
. For more information, see the
DGKat Installation Guide
. DGKat
cards support Deep Color only at resolutions of 720p and lower.