![background image](http://html.mh-extra.com/html/kramer/vs-3232dn-em/vs-3232dn-em_user-manual_2001322040.webp)
Kramer Electronics Ltd.
VS-3232DN-EM
– Using the Test Video Card
37
The Resolution DIP-switch is used to set the resolution of the generated video:
Available PC Resolutions for Generated Video (Jumper Off)
DIP-switch Position Resolution
1
2
OFF
OFF
1024 x 768 @60Hz (default)
ON
OFF
1280 x 1024 @60Hz
OFF
ON
1600 x 1200 @60Hz
ON
ON
1920 x 1200 @60Hz
Available HD Resolutions for Generated Video (Jumper On, Default)
DIP-switch Position
Resolution
1
2
OFF
OFF
480p (default)
ON
OFF
720p
OFF
ON
1080i
ON
ON
1080p
shows the Resolution DIP-switch with both switches off (up, default, 480p).
Figure 12: Resolution DIP-switch
Setting the Pattern of the Generated Video
The Pattern button is used to set the pattern of generated video. There are 32 available
patterns. Press the button repeatedly to cycle through the patterns.
Installing the Test Module
By default, the test module is installed in the configuration. If you uninstalled the test module
in the configuration, it must be reinstalled before it can be used. When installing the test
module, the number of configured inputs and outputs must be increased by one. For example:
•
If your
VS-3232DN-EM
has four inputs and eight outputs, you must configure the
VS-3232DN-EM
as 5 x 9
•
If your
VS-3232DN-EM
has 32 inputs and 32 outputs, you must configure the
VS-3232DN-EM
as 33 x 33
To install the test module in the configuration:
1. Press ESC, ENT and LOCK together.
The following is displayed:
Configuration Device