Kramer Electronics Ltd.
VS-3232DN-EM
– Operating Your Video Matrix Switcher
20
The shifting display functionality is enabled when:
•
The switcher is in between operations (waiting for its next operation while all previous
operations are complete or cancelled).
•
Recalling a setup using the ◄ or ► buttons.
When entering an output/input combination, the contents of the LCD display automatically
shift to indicate the current status of the selected output.
Using the Selector Buttons
For numbers between 1 and 9, the
VS-3232DN-EM
can handle two digit numbers as well as
single digit numbers. When entering a single digit number (for example 5), you can either
press 0 followed by 5, or 5 followed by ENT.
Pressing 00 (or 0, ENT) is only relevant for an input and is used to disconnect the currently
entered output number from the input.
For example, the following display indicates that outputs 8 and 12 are disconnected from any
input (note that the corresponding inputs in the second line are blank):
06 07 08 09 10 11 12 13
12 08
10 14 13
06
The ESC button is used to cancel an operation without affecting the current status. For
example, if you enter an incorrect number by mistake, press the ESC button to cancel the
operation.
At any stage, if no button is pressed within approximately 15 seconds, the automatic timeout
causes the
VS-3232DN-EM
to exit the operation and revert to the output/input display.
Confirming Actions
You can choose to work in the At Once (default, for all actions except storing/recalling) or the
Confirm mode.
In the At Once mode:
•
The TAKE button does not light.
•
Pressing an
OUT-IN combination implements the switch without further user
confirmation.
•
You save time as execution is immediate and actions require no user confirmation.
•
No protection is offered to correct an erroneous action.
In the Confirm mode:
•
The TAKE button lights.
•
You enter an action and then confirm it by pressing the TAKE button.
•
Every action requires user confirmation, protecting against erroneous actions.
