![background image](http://html.mh-extra.com/html/kramer/vs-3232dn-em/vs-3232dn-em_user-manual_2001322120.webp)
Kramer Electronics Ltd.
VS-3232DN-EM
– Protocol 3000
117
DETAIL-TIMING
Functions
Permission
Transparency
Set
DETAIL-TIMING
End User
Public
Get
DETAIL-TIMING?
End User
Public
Description
Syntax
Set
Set detailed timing
parameters
#
DETAIL-TIMING
SPparam,channel,valueCR
Get
Get detailed timing
parameters
#
DETAIL-TIMING?
SPparam,channelCR
Response
~nn@
DETAIL-TIMING
SPparam,channel,valueCR LF
Parameters
param
–
1
(H-De-Start
– horizontal start position of port video),
2
(H-De-Total
– horizontal active pixels of
port video),
3
(H-Total
– total horizontal pixels of port video),
4
(V-De-Start
– vertical start position of port
video),
5
(V-De-Total
– vertical active lines of port video),
6
(Auto-DE-Adjust
– resolution detection mode),
7
(Auto-PHASE-Adjust
– phase mode)
channel
– input number:
1-32
(varies according to installed input cards, see
value
– video parameter value in Kramer units:
for all
param
values:
++
(increase current value),
--
(decrease current value)
for 1 (H-De-Start):
1-600
for 2 (H-De-Total):
1-4000
for 3 (H-Total):
1-7000
for 4 (V-De-Start):
1-255
for 5 (V-De-Total):
1-3000
for 6 (Auto-DE-Adjust):
0
(auto),
1
(user defined),
2
(auto adjust)
for 7 (Auto-PHASE-Adjust):
0
(auto),
1
(user defined),
2
(auto adjust)
Response Trigger
Notes
A minus sign precedes negative values.
The auto adjust feature (in the
Auto-DE-Adjust
and
Auto-PHASE-Adjust
parameters) requires the
device to recalculate the parameters based on the currently connected source. The result may be
different from the standard parameters for the currently set resolution. The result is saved in non-volatile
memory and is recalled when the same source is used again. In order to revert to auto pre-defined
parameters, either reset to factory setting with the relevant source connected or connect a different
source.
K-Config Example
Set the total horizontal pixels (
H-Total
parameter) of input 4 to 6000:
“#DETAIL
-
TIMING 3,4,6000”,0x0D
Set the resolution detection mode (
Auto-DE-Adjust
parameter) of input 4 to auto adjust:
“#DETAIL
-
TIMING 6,4,2”,0x0D