![background image](http://html1.mh-extra.com/html/kramer/vp-796a/vp-796a_user-manual_2001809023.webp)
©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
23
5.
Unit Control
The unit can be controlled via the front panel, a web page built-in into the unit or an API protocol
interface. The next two chapters describe the Front Panel and Web Browser control methods. The API
interface can be found in a separate document available on our web site.
6.
Front Panel Control
You can enter the main menu by pressing the Menu/Sel key from the status screen. You can use the
jog wheel and Menu/Sel and Esc buttons to navigate through the different menus.
A complete diagram of the menu tree is shown in Appendix A. The audio menu tree for units fitted
with the audio option is shown in Appendix B.
Next, is a brief description of the functions and settings available from the front panel menus.
Main Menu
Under the main menu are the main sub-menus that allow user to setup and operate the unit. These
sub-menus are:
•
Input
•
Output
•
LED Screen Size
•
PIP
•
System
•
Audio
•
Status
Each menu includes an Exit entry to return to the previous level. Some adjustments are not applicable
to all signal types or operating modes, in which case those non-applicable functions will be greyed out
and are not accessible.
The unit is designed to have separate memories for all the settings in each section. All Input parameters
are specific to your chosen input channel and input signal type, and are not global to the unit. For
example, if you change the settings for the composite video channel, you will not affect the settings you
may have made in the DVI channel.