©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
33
6.1.4.3
Pan Tilt Zoom (PTZ)
This menu provides settings to zoom and shrink the image, pan horizontally and tilt vertically within the
image. PTZ can be switched on or off and the settings can be saved per input channel or globally, i.e. if
applied globally the same PTZ settings are applied when switching input channels or changing the input
mode. The Zoom setting allows zooming into the image or shrink it.
When Aspect Lock is set to On, vertical zoom is disabled and the horizontal zoom or shrink factor is also
used to vertically adjust the image. In this mode the aspect ratio is preserved.
When Aspect Lock is Off, horizontal and vertical scaling factors are set separately, regardless of the
input image aspect ratio.
Off raster panning is also allowed, i,e, the image can be shifted outside the active area of the display.
The PTZ settings can be set to the default settings with the reset button.
Settings:
On/Off
Default:
Off
6.1.4.3.1
PTZ Enable
PTZ needs to be turned on before the other functions are enabled.
Settings:
On/Off
Default:
Off
6.1.4.3.2
PTZ Setting
This setting determines whether the PTZ values are applied on the selected input, or globally
Settings:
Per Input / Globally / Per Input per Mode
Default:
Per Input
6.1.4.3.3
PTZ Value
This setting determines whether the PTZ adjustments are done in pixel increments or in percentages of
the input image size.
Settings:
Pixels / Percent
Default:
Pixels