©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
45
6.3.6
Standard Splicing
The following figure illustrates how to setup two units in the standard configuration mode.
6.3.6.1
Standard Splicing - 2x1 Example (pre-split source)
The following figure illustrates how to setup two units in the standard configuration mode. In the first
example, the input image is pre-split at the source, so the Splicing Zoom feature is turned Off
Figure 5: Standard Splicing - 2x1 example (pre-split source)
STEP
MENU ITEM TO MODIFY
Unit-1
Unit-2
1
Output>Display Type>I/O Lock
Source
Source
2
LED Screen Size> Splicing Zoom
Off*
Off*
3
LED Screen Size> Splicing Width
1*
1*
4
LED Screen Size> H-Pos
1*
1*
5
LED Screen Size> Right Edge
1320
1320
6
LED Screen Size> Bottom Edge
1440
1440
* Some steps are skipped, because the values are the same as the default settings after factory reset
