©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
19
4.3
Output Specifications
All output channels are active simultaneously, provided that the input signal is not HDCP encrypted. All
units include an HDMI, and a DVI-U connectors for DVI/HDMI connectivity. Some models feature a BNC
connector for 3G-SDI signals and an RJ-45 connector supporting HDBaseT capability. The DVI-D
connector supports HDMI with 36-bit video and audio formats when connected to a suitable HDMI
receiver. The colour depth of the HDMI signal is determined by a menu selection and the capabilities of
the monitor.
Interlaced outputs are only supported on models with 3G-SDI output.
4.3.1
3G-SDI Output
•
Format: SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video
•
Input impedance: 75 ohms.
•
SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant, accepts 484i, 576i, 720, 1080i and
1080p single link formats at 270Mb, 1.485Gb or 2.97Gb rates.
4.3.2
HDMI & DVI Outputs
•
HDMI with or without HDCP, 36-bit video compatible.
•
DVI-D input with or without HDCP
•
Signal formats - video
o
SD: 625i (576i) and 525i (480i) in double-rate formats;
o
ED: 480p, 576p;
o
HD: 1280x720p, 1920x1080i, 1920x1080psf; 1920x1080p 23.97, 24, 25, 29.94, 30, 50,
59.94 & 60Hz; 2048x1080p 23.97, 24, 25, 29.94, 30, 50, 59.94 & 60Hz.
•
Signal formats
–
computer
o
Common VESA graphics formats from VGA up-to 1080p and 1600x1200
•
HDMI output also supports: 4K signals: 3840x2160p & 4096x2160p 23.97, 24, 25, 29.94, 30, 50,
59.94 & 60Hz (50, 59.94 & 60Hz supported in YUV 4:2:0 colour space format)
4.3.3
HDBT Output
•
Uncompressed HD video over RJ45 connector and max.100m CAT5e cable (or better)
•
CAT5e/CAT6 for 100m and signals with less than 225MHz Pixel Clock
•
CAT6a/CAT7 for 100m and signals up to 297MHz Pixel Clock
•
Signal formats as HDMI 1 and HDMI 2.
4.3.4
HDCP Output encryption
When the input signal is HDCP encrypted, the DVI-D, HDMI and HDBaseT outputs will also be
encrypted and the 3G-SDI output will be disabled. If the display device does not support
HDCP, the output will be black and a message indicating that the presence of an HDCP signal
will be shown on the screen.
