Kramer Electronics Ltd.
VP-440X
– Operating and Controlling VP-440X
14
Menu Item
Function
source is detected, or the analog audio when a DVI input is
detected.
Mic Settings
Mic Mode
Set to Off (default), Mixer, Talkover or Mic Only.
When Mic Mode is set to Talkover (see
), set the
following:
Depth [%]
Set the depth value to determine the decrease of the audio level
during microphone takeover (press + to further decrease the
talkover audio output level; press
– to lessen the talkover output
audio decrease level).
Trigger [dB]
Set the trigger value to determine the microphone threshold
level that triggers the audio output level decrease.
Attack Time
Set the attack time to set the
transition
time of the audio level
reduction
after the signal rises above the threshold level.
Hold Time
Set the hold time to define the time-period talkover remains
active although the signal falls below the threshold level (for a
short period of time).
Release
Time
Set the release time to define the transition time for the audio
level to return from its reduced level to its normal level after the
Hold Time period.
Mic Volume
Set microphone volume.
EQ
Set the equalizer for the 120Hz, 200Hz, 500Hz, 1200Hz, 3000Hz, 7500Hz and
12000Hz frequency bands.
Embedded In -> Out
Apply DSP (default) to the embedded audio or ByPass it. Bypassed signals are
routed directly to the HDMI and HDBT outputs and are not processed by the
DSP circuitry.
Select ByPass for compressed audio sources, for example, sources
with Dolby or DTS encoding.
Audio parameters are defined.
Talkover Mode
Figure 4: Talkover Mode