![background image](http://html1.mh-extra.com/html/kramer/vp-440x/vp-440x_user-manual_2002221036.webp)
Kramer Electronics Ltd.
VP-440X
– Using Embedded Webpages
34
4. In the Picture area, use the available slider controls (for HDMI inputs or PC input) to
adjust the display picture quality.
5. In the Noise Reduction drop-down box and select the level of noise reduction or select
Auto.
6. When the active input is VGA, in the Finetune area, click
Auto Adjust
to automatically
adjust the video output or use the slider controls to adjust the following:
▪
H-Position
– Set the horizontal position of the video on the display screen.
▪
V-Position
– Set the vertical position of the video on the display screen.
▪
Phase
– Set the phase of the input sampling clock.
▪
Clock
– Set the input sampling rate.
Output settings are defined.
Configuring HDCP per Input/Output
VP-440X
enables you to configure HDCP individually for each input/output via the HDCP
webpage.
To configure HDCP:
1. Click
HDCP
on the Navigation List.
The HDCP page appears.
Figure 21: The HDCP Page
2. In the On Output area, click one of the following for the outputs:
▪
Input
– Signal only sent with HDCP encryption when the input includes HDCP
encryption.
▪
Output
– Signal is always sent with HDCP encryption when the output supports it,
even if the input does not include encryption.
3. In the On Input area, click
ON
or
OFF
for each of the four inputs to turn on or off
supporting HDCP encryption for that input.
HDCP is configured.