![background image](http://html1.mh-extra.com/html/kramer/vp-440x/vp-440x_user-manual_2002221008.webp)
Kramer Electronics Ltd.
VP-440X
– Defining VP-440X 4K Presentation Switcher / Scaler
6
Figure 2: VP-440X 4K Presentation Switcher / Scaler Rear Panel
#
Feature
Function
HDMI™ IN Connectors
Connect to an HDMI source (from 1 to 4).
PROG USB Type A
Connector
Use to upgrade the firmware.
DATA (Tx, Rx, GND)
Terminal Block Connectors
Connect to a PC to Extend RS-232 signals via the HDBT OUT port to
control peripheral devices that are connected to the HDBT receiver
(for example, a projector connected to
TP-780Rxr
) and/or control a
source (e.g. a Blu-ray player) using an RS-232 controller at the
receiver.
CONTROL (Tx, Rx, GND)
Terminal Block Connectors
Connect to a PC or serial controller to control the
VP-440X
or control
the output display (configurable).
SELECT 7-pin Terminal
Block Connector
HDMI 1 to HDMI 4 and PC: connect to contact closure switches (by
momentary contact between the desired pin and G pin) to select an
input.
REMOTE: connect the pin to G to turn on/off the display or the device
(configurable, see
).
PC IN 15-pin HD
Connector
Connect to the computer graphics (VGA) source.
AUDIO INPUT
Unbalanced
Stereo 3.5 Mini
Jack
HDMI
™ Connect to the analog audio HDMI source (from 1 to 4).
PC
Connect to the analog audio computer graphics (VGA) source.
HDBT OUT RJ-45
Connector
Connect to an HDBT receiver (for example,
TP-780Rxr
).
AUDIO OUT 3.5 Mini Jack
Connect to an unbalanced stereo audio acceptor.
HDMI OUT Connector
Connect to the HDMI acceptor.
ETHERNET Connector
Connects to the PC or other controller through computer networking.
5V DC
+5V DC connector for powering the unit.
9
10
11
12
13
14
15
16
17
18
19
20
21