Kramer Electronics Ltd.
VP-440X
– Using Embedded Webpages
43
▪
Check
Enable
to enable the command.
Figure 28: RS-232 Page
– Creating a Command
6. Click
Add
.
Figure 29: RS-232 Page
– Command Added
7. You can:
▪
Click
Delete
to delete the command.
▪
Click
Test
to test the command.
▪
Change any of the command configurations.
▪
Enable or disable the command.
Control the display via the RS-232 port.
For RS-232 control of an external device on the receiver side (for example, the display at the
HDBT receiver), set up as above, connect the CONTROL RS-232 port to the DATA RS-232
port and connect Rx and Tx on the receiver to the display.