![background image](http://html1.mh-extra.com/html/kramer/vp-440x/vp-440x_user-manual_2002221033.webp)
Kramer Electronics Ltd.
VP-440X
– Using Embedded Webpages
31
Configuring Network Settings
VP-440X
enables configuring network settings setting, including DHCP and static IP
addresses.
To configure network settings:
1. In the Navigation pane click
Device Settings
. The Device Settings page appears (see
).
Figure 18: The Device Settings Page
2. Change the network settings as required and click
Set changes
.
–OR–
Select the
DHCP On
check box and click
Set changes
.
A message appears asking you to confirm the setting change.
3. Click
OK
to confirm the change.
The current webpage session is disconnected. To access the webpages, reload with the
new setting.
4. Click
Soft Factory Reset
to restart the unit.
IP address values and User/Password settings do not return to their factory default
parameters.
Network settings are defined.