28
FIREPLACE SETUP
SP-41-L MANUAL REV#2 OCT 2017
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
8.3 #SP41-500 Log Set Installation
CAUTION: Do not place logs or lava rock directly over
burner port holes. Improper log placement may affect flame
appearance and cause excessive soot to build upon the logs
and glass.
• If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions
included with the kit.
• Log numbers are located on the bottom of each log. Refer
to the following instructions and illustrations for proper log
placement.
1. Align the holes in the bottom of log SP41-1 with the mounting
pins on the log plates at the back of the firebox. Push log
down to seat.
2. Align log SP41-2 with the notch in log SP41-1 as shown.
3. Align log SP41-3 as shown.
4. Align SP41-4 and SP41-5 logs with the notches in log SP41-
3 as shown.
5. Distribute lava rock onto burner cover in front of the burner.
Do not block burner ports or airspaces.
6. Use a steel or stiff bristle nylon brush to distribute rock wool
embers onto logs and burner.
Figure 8.2, Completed Install
