FACING AND FINISHING
17
SP-41-L MANUAL REV#2 OCT 2017
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
4.0 FACING AND FINISHING
4.1 Secure the Appliance
NOTE: The nailing tabs on both sides of the appliance allow
installations for a flush mount, 1/2 in (13 mm) facing material,
or 5/8 in (16 mm) facing material.
CAUTION: The fireplace must be secured to framing regardless
of finishing material used.
1. Locate the nailing tabs on the right and left sides of the
fireplace necessary to accommodate the thickness of your
facing material.
2. Bend out the (4) nailing tabs until parallel with fireplace face.
Do not bend toward fireplace face.
3. When installing, center the fireplace in the rough opening
to allow for the minimum 1/4" (6mm) clearance from the
appliance corners.
4. Secure the appliance to the framing studs by using nails or
screws through the nailing tabs.
Figure 4.1, Nailing Flange Installation
