44
4.3
Port Configuration
This chapter delivers guidance on the configuration of switch ports, including port state
enable/disable, auto-negotiation, speed, duplex, flow control, rate limit control and port
aggregation settings. The view on port status and aggregation information can be also
achieved.
Following commands are included :
4.3.1 Understand the port mapping
4.3.2 Port Control
4.3.3 Port Status
4.3.4 Rate Control
4.3.5 Port Trunking
4.3.6 Command Lines for Port Configuration
4.3.1
Understand the port mapping
Before the port setting, please check the port allocation of JetNet 5020G, which is printed
on the front panel. Follow the port ID to configure JetNet 5020G.
There are 16 Fast Ethernet ports and 4 Giga Combo ports. In Web UI, the port number is
available from port 1~20. Port 1~16 represent Fast Ethernet ports, and 17~20 stand for
Giga Combo ports. In CLI, fa1, fa2
…fa16 represent Fast Ethernet ports and gi17, gi18…
gi20 represent Giga Combo ports.
4.3.2
Port Control
Port Control commands allow you to enable/disable port state, or configure the port
auto-negotiation, speed, duplex and flow control.
Figure 4.3.2.1 The main Web UI of the Port Configuration.
Select the port you want to configure and make changes to the port.
