60
Instance ID:
Select the Instance ID, the available number is 1-15.
VLAN Group:
Type the VLAN ID you want mapping to the instance.
Instance Priority:
Assign the priority to the instance.
After
finish your configuration, click on
Add
to apply your settings.
Current MST Instance Configuration
This page allows you to see the current MST Instance Configuration you added. Click on
“
Apply
” to apply the setting. You can “
Remove”
the instance or “
Reload
“ the configuration
display in this page.
4.4.5
MSTP Port Configuration
This page allows configure the Port settings. Choose the Instance ID you want to configure.
The MSTP enabled and linked up ports within the instance will be listed in this table.
Note that the ports not belonged to the Instance, or the ports not MSTP activated will not
display. The meaning of the Path Cost, Priority, Link Type and Edge Port is the same as
the definition of RSTP.
