16
5.
Key in the user name and the password. The default user name and password is
admin
.
6.
Click on
Enter
or
OK.
Welcome page of the web-based management interface will
then appear.
7.
Once you enter the web-based management interface, all the commands you see
are the same as what you see by HTTP login.
3.3
Preparation for Telnet Console
3.3.1
Telnet
Korenix JetNet 5020G supports Telnet console. You can connect to the switch by Telnet
and the command lines are the same as what you see by RS232 console port. Below are
the steps to open Telnet connection to the switch.
1.
Go to Start -> Run -> cmd. And then press
Enter
2.
Type the
Telnet 192.168.10.1
(or the IP address of the switch). And then press
Enter
3.3.2
SSH (Secure Shell)
Korenix JetNet 5020G also support SSH console. You can remotely connect to the
switch by command line interface. The SSH connection can secure all the configuration
commands you sent to the switch.
SSH is a client/server architecture while the Managed Switch is the SSH server. When
you want to make SSH connection with the switch, you should download the SSH client
tool first.
SSH Client
There are many free, sharewares, trials or charged SSH clients you can find on the
internet. Fox example, PuTTY is a free and popular Telnet/SSH client. We’ll use this
tool to demonstrate how to login Managed Switch by SSH. Note:
PuTTY is copyright
1997-2006 Simon Tatham
.