JetNet 4706/4706f Industrial Managed PoE Switch
81
<1-65535> reset time
Switch(config)# relay 1 ping 192.168.10.33 reset 60
<0-65535> hold time to retry
Switch(config)# relay 1 ping 192.168.10.33 reset 60 60
Port Link Failure
Switch(config)# relay 1 port
PORTLIST port list
Switch(config)# relay 1 port fa1-5
Power Failure
Switch(config)# relay 1 power
<1-2> power id
Switch(config)# relay 1 power 1
Switch(config)# relay 1 power 2
Super Ring Failure
Switch(config)# relay 1 ring
Disable Relay
Switch(config)# no relay
<1-2> relay id
Switch(config)# no relay 1
(Relay_ID: 1 or 2)
<cr>
Display
Switch# show relay 1
Relay Output Type : Port Link
Port : 1, 2, 3, 4,
Switch# show relay 2
Relay Output Type : Super Ring
Event Selection
Event Selection
Switch(config)# warning-event
coldstart Switch cold start event
warmstart Switch warm start event
linkdown Switch link down event
linkup Switch link up event
all Switch all event
authentication Authentication failure event
fault-relay Switch fault relay event
power Switch power failure event
super-ring Switch super ring topology change event
time-sync Switch time synchronize failure event
Ex: Cold Start event
Switch(config)# warning-event coldstart
Set cold start event enable ok.
Ex: Link Up event
Switch(config)# warning-event linkup
[IFNAME] Interface name, ex: fastethernet1 or gi8
Switch(config)# warning-event linkup fa5
Set fa5 link up event enable ok.
Display Switch#
show
warning-event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: fa4-5
Link Up: fa4-5
Power Failure:
Super Ring Topology Change: Disabled
Fault Relay: Disabled
Syslog Configuration
Local Mode
Switch(config)# log syslog local
Server Mode
Switch(config)# log syslog remote 192.168.10.33
Both
Switch(config)# log syslog local
Switch(config)# log syslog remote 192.168.10.33
Disable
Switch(config)# no log syslog local
