manualshive.com logo in svg

Korenix JetNet 4706, User Manual

Share
Download
Korenix JetNet 4706 User Manual Download Page 35

 

JetNet 4706/4706f Industrial Managed PoE Switch   

31

 

 

  Click on the Folder icon to select the target file you want to backup/restore.   

Note:

 The folders of the path to the target file do not allow you to input space key. 

 

The following figure is the Web UI for Backup/Restore Configuration - TFTP Server mode 

 

Type in the IP address of TFTP Server IP. Then click the 

Backup/Restore 

button. 

4.2.7 Firmware 

Upgrade 

In this section, you can update the switch with the latest firmware. 

Korenix

 provides the 

latest firmware on their Web site (www.korenix.com). New firmware may include new 
features, bug fixes or other software changes. The Web site also provides release notes 
for the update as well. We suggest you use the latest firmware 

before

 installing the switch. 

Note: 

The system will automatically reboot after you finish upgrading the new firmware. 

Please inform all attached users before doing this.

 

The following figure is the Web Main UI for Firmware Upgrade. 

 

 

There are 2 modes for users to backup/restore the configuration file, Local File mode and 
TFTP Server mode. 

Summary of Contents for JetNet 4706





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands