manualshive.com logo in svg

Korenix JetNet 4706, User Manual

Share
Download
Korenix JetNet 4706 User Manual Download Page 36

 

JetNet 4706/4706f Industrial Managed PoE Switch   

32

Local File

 mode: In this mode, the switch acts as the file server. Users can browse the 

target folder and then type in the file name to backup the configuration. Users can also 
browse the target folder and select the existing configuration file to restore the 
configuration back to the switch. This mode is only provided by Web UI; CLI is not 
supported. 

TFTP Server

 mode: In this mode, the switch acts as the TFTP client. Before you do so, 

make sure that your TFTP server is ready. Then, type in the TFTP Server IP address. This 
mode can be used in both Web UI and CLI. 

TFTP Server IP Address

: Key in the IP address of your TFTP Server here. 

Firmware File Name

: View the file name of the new firmware.

 

The UI also shows you the latest firmware version and build date. Please check the 
version number after you reboot the switch. 

 

 

The following Web UI is for Firmware Upgrade - Local File mode.

   

 

 

 

  Click on the Folder icon to select the correct firmware you want to upgrade 

The following Web UI is for Firmware Upgrade – TFTP Server mode. 

 

 

Type in the IP address of the TFTP Server and the Firmware File Name. Then click the 

Summary of Contents for JetNet 4706





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands