JetNet 4706/4706f Industrial Managed PoE Switch
36
Time Setting
NTP Server
Switch(config)# ntp peer 192.168.10.100
Time Zone
Switch(config)# clock timezone 26
Sun Jan 1 04:13:24 2006 (GMT) Greenwich Mean Time:
Dublin, Edinburgh, Lisbon, London
Note:
By typing clock timezone ?, you can see the timezone
list. Then choose the number of the timezone you want to
select.
Display
Switch# sh ntp associations
1 192.168.10.100
2 192.168.10.101
Switch# show clock
Sun Jan 1 04:14:19 2006 (GMT) Greenwich Mean Time:
Dublin, Edinburgh, Lisbon, London
Switch# show clock timezone
clock timezone (26) (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
Backup and Restore
Backup Startup
Configuration file
Switch# copy startup-config tftp: 192.168.10.33
Writing Configuration [OK]
Note 1: To backup the latest startup configuration file, you
should save current settings to flash first. You can refer to 4.12
to see how to save settings to the flash.
Note 2: 192.168.10.33 is the TFTP server’s IP. Your
environment may use different IP addresses. Please type
target TFTP server IP in this command.
Restore Configuration Switch# copy tftp: 192.168.10.33 startup-config
Show Startup
Configuration
Switch# show startup-config
Show Running
Configuration
Switch# show running-config
Firmware Upgrade
Firmware Upgrade
Switch# archive download-sw /overwrite tftp 192.168.10.33
JetNet 4706.bin
Firmware upgrading, don't turn off the switch!
Tftping file JetNet 4706.bin
Firmware upgrading
................................................................................
................................................................................
...........................
Firmware upgrade success!!
Rebooting.......
Factory Default
Factory Default
Switch# reload default-config file
Reload OK!
Switch# reboot
System Reboot
