75
GVRP Protocol:
Allow user to enable/disable GVRP globally.
State:
After enable GVRP globally, here still can enable/disable GVRP by
port.
Join Timer:
Controls the interval of sending the GVRP Join BPDU.
An
instance of this timer is required on a per-Port, per-GARP Participant basis
Leave Timer:
Control the time to release the GVRP reservation after
received the GVRP Leave BPDU. An instance of the timer is required for
each state machine that is in the LV state
Leave All Timer:
Controls the period to initiate the garbage collection of
registered VLAN. The timer is required on a per-Port, per-GARP Participant
basis
4.5.4 VLAN Table
This table shows you current settings of your VLAN table, including VLAN
ID, Name, Status, and Egress rule of the ports.
VLAN ID:
ID of the VLAN.
Name:
Name of the VLAN.
Status:
Static
shows this is a manually configured static VLAN.
Unused
means this VLAN is created by UI/CLI and has no member ports. This
VLAN is not workable yet.
Dynamic
means this VLAN is learnt by GVRP.
After created the VLAN, the status of this VLAN will remain in Unused
status until you add ports to the VLAN.
Sample of JetNet 5010G
