44
4.2.8 Factory Default
In this section, you can reset all the configurations of the switch to default
setting. Click on
Reset
the system will then reset all configurations to default
setting. The system will show you pop-up message window after finishing this
command. Default setting will work after rebooting the switch.
Figure- 4.2.8.1 The main screen of the Reset to Default
Figure 4.2.8.2 Popup alert screen to confirm the command. Click on
Yes
to
start it.
Figure 4.2.8.3 Popup message screen to show you that have done the
command. Click on
OK
to close the screen. Then please go to
Reboot
page to
reboot the switch.
Click on
OK.
The system will then auto reboot the device.
Note: If you already configured the IP of your device to other IP address, when
you use this command by CLI and Web UI, our software will not reset the IP
address to default IP. The system will remain the IP address so that you can still
connect the switch via the network.
