30
Here are some useful commands for you to see these available commands.
Save your time in typing and avoid typing error.
? To see all the available commands in this mode. It helps you to see the
next command you can/should type as well.
(Character) ? To see all the available commands starts from this
character.
Tab This tab key helps you to input the command quicker. If there is only
one available command in the next, clicking on tab key can help to finish
typing soon.
Ctrl+C To stop executing the unfinished command.
Ctrl+S To lock the screen of the terminal. You can’t input any command.
Ctrl+Q To unlock the screen which is locked by Ctrl+S.
Ctrl+Z To exit configuration mode.
Alert message when multiple users want to configure the switch. If the
administrator is in configuration mode, then the Web users can’t change the
settings. JetNet 4508 V2/4508f V2 allows only one administrator to
configure the switch at same time.
Switch(config)# a
?
access-list Add an access list entry
administrator Administrator account setting
arp Set a static ARP entry
Switch# co (tab) (tab)
Switch# configure terminal
Switch(config)# ac (
tab
)
Switch(config)# access-list
Switch(config)# interface
?
IFNAME Interface's name
vlan Select a vlan to configure
