Kontron IP Network Server NSC2U
December 2009
Product Guide, rev. 1.4
97
Optional Component Installations—NSC2U Server
2. Slide the optical drive into the open slot until the latch pops up to secure the drive
in the properly aligned position (“A”)
3. If this is the last task you are performing, replace the processor air duct and the
top cover of the chassis. Reconnect all the external devices and plug in the power
cord(s).
For information about mounting the server in a rack, see
the Server into a Rack” on page 48
Figure 84.
Installing the Optical Device into the Chassis
TS000555
A
B
