KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 56
10.3.
Replacing the Lithium Battery
Danger of explosion when replaced with wrong battery type
Replace the button cell lithium battery only with the same or equivalent battery type
recommended by the manufacturer. The battery type must be UL recognized.
Do not dispose of lithium batteries in the general trash collection. Dispose the battery
according to the local regulations dealing with the disposal of these special materials, (e.g.
to the collecting points for dispose of batteries)
.
To replace the button cell lithium battery (CR2032) on the mainboard, proceed as follows:
1.
Switch off and disconnect the system from the mains power supply.
2.
Open the cover, as described in the Chapter 7.1: Opening and Closing the Cover.
3.
Remove expansion cards that prevent access to the battery, see Chapter 7.2: Accessing Internal Components.
4.
Remove the lithium battery from the holder by pulling the ejector spring outwards.
5.
Place a new lithium battery in the battery holder and pay close attention to the polarity of the battery.
6.
Replaced the lithium battery only with the same type of battery or with a Kontron recommended battery.
7.
Reinstall the removed expansion cards and reattach the connecting cables,
8.
Close the cover, as described in the Chapter 7.1: Opening and Closing the Cover.(step 6)
