KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 24
4.1.3.
LED Indicators
The LED indicators are located at the front side behind the front access panel. The LED status is also visible when the
front access panel is closed.
Figure 14: LED Indicators
Table 3: LED Indicators
LED Function
Color
Description
LAN2
Green
Indicates LAN2 activity by lighting up/flashing when Ethernet Link/Activity is
established/detected
LAN1
Green
Indicates LAN1 activity by lighting up/flashing when Ethernet Link/Activity is
established/detected
SYSID
Green
Pressing the SYSID Button powers On/Off the SYSID LED to identify the system in a
multi-system environment
SYSF2
NC
SYSF1
Red
Indicates system status and signalizes if a signal failure occurs,
LED OFF - system OK
LED ON - system fail
PWR
Green
Lights up green when system is switched on via power button
HDD
Orange
Lights up during all drive activities to indicate that drives are active and transferring
data
4.1.4.
SYSID Button
The system identification (SYSID) button is located below the SYSID indicator LED. The SYSID LED marks the system
for intended maintenance and is used to ease identification in work environments with multiple-systems. Pressing
the SYSID button, lights up the SYSID LED. The SYSID LED is switched off, by pressing the SYSID button.
Figure 15: SYSID Button
