KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 20
The KISS 4U V3 SKX platform supports up to four drive bays, where drive bays D1 , D2 and D3 are front accessible and
drive bay D4 is internal. Each drive bay can support a range of drives and drive bay D1 and drive bay D2 may be
combined.
The KISS 4U V3 SKX is powered with a 800 W Power Supply Unit (PSU) with an input voltage range of 100 V to 240 V.
The power button is located on the front side behind the front access panel. The LED indicators are located on the
front side and consist of a power, hard disk activity, LAN activity, system status and system ID LEDs
Three system fans are installed at the front side of the system. The three fans are part of interchangeable fan
assembly. The fan assembly simplifies the installation and removal of the three system fans, and enables
replacement even during operation. The washable filter pad attaches to the fan assembly to protect the system
against dust and dirt. The filter pad can be replaced during operation.
The KISS 4U V3 SKX is highly customizable and can be expanded with up to seven PCIe expansion devices, see
Chapter 5.3: PCIe Slots; and up to eight SATA drives either front accessible or internal drives, see Chapter 5.2: Drive
Bays.
Before switching on the KISS 4U V3 SKX, make sure that the ventilation holes (air intake and air exhaust) are not
obstructed.