KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 53
7.
After cleaning and drying the filter pad, place the filter pad in the filter pad holder (Figure 39).
8.
Reattach the filter pad holder to the front side of the fan assembly by inserting the positioning latches
(Figure 38, pos. 7) into the positioning holes (Figure 37, pos. 4).
9.
Fasten the filter pad holder by tightening the knurled screw (Figure 36, pos. 2) to the bolt with tapped hole
(Figure 37, pos. 1) on the fan assembly.
Defective components may only be replaced by Kontron original spare parts.
For a list of spare parts, see Table 2: Accessories and Spares Parts
Figure 37: Fan Assembly without Filter Pad Holder
Figure 38: Filter Pad Holder without Filter Pad
Figure 39: Filter Pad Holder with Filter Pad
Figure 40: Filter Pad
1
Fan assembly with tapped hole for knurled
screw of filter pad holder
2
Air intake openings at the front side of the
fan assembly
3
Fan assembly knurled screws
4
Positioning holes for the filter pad holder
5
Filter pad holder
6
Knurled screws of the filter pad holder
7
Positioning latches of the filter pad holder
4
1
1
2
3
7
6
5
