KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 23
4.1.1.
Power Button
The power button is located on the front side of the platform, behind the front access panel and is used to power
On/Off the system. Press the button to switch the system on or off.
Pressing the power button for longer than four seconds immediately switches the power off.
Figure 12: Power Button
The power button does not disconnect the system from the mains power supply. When
switched off using the power button, there is still a standby voltage of 5 VSB on the
mainboard.
Power cable and power connectors must always remain easily accessible.
Switching off the power using the front panel power button or the PSU’s power On/Off
switch may not disconnect the KISS 4U V3 SKX platform from the main power source. A
standby-voltage of 5 VSB may remain. The KISS 4V V3 SKX is only completely disconnected
from the main power source, when the power cable is disconnected, either from the mains
power plug socket, or the PSU’S AC power cable connector Therefore, for safety reasons the
power cable must always remain easily accessible.
Performing a forced power off can lead to loss of data or other undesirable effects! Use the
Power Button to shut down correctly.
4.1.2.
USB Ports
Two USB 2.0 ports are located on the front side of the system behind the front access panel.
Figure 13: USB 2.0 Ports on the Front Side
If USB devices are connected to the USB ports on the front of the device, the front access
panel cannot be closed and locked
