Konica Minolta NC-502, User Manual

Page: 44 / 62

Connecting the computer and copier
7
NC-502 7-9
Conn
ec
tin
g
the
c
o
mp
uter
a
nd c
o
p
ier
Chap
ter
7
7.2.5 Connecting a copier to the NetWare server
Supported environments
The controller supports the system environments described below.
Setting up NetWare 4.x/ 5.x/ 6 print server mode
1
Log in with administrator privileges.
2
Start up NWadmin.
3
Select the print service system or category container, and then select
“Print service quick setup” from the tool menu.
4
Enter settings into the Print server name , Printer name , Print queue
name
, and
Volume name
boxes, select
Other/Unknown
under
Type
name
, and then save the settings.
5
Start up PageScope Web Connection and log in to the Administrator
mode, select
NetWare Configuration from the “Network” tab, and
then use PageScope Web Connection to specify the following settings
on the copier. (Refer to “8 Using PageScope Web Connection” for de-
tails.)
6
Load MONITOR.NLM using the NetWare server console.
7
Select the connection settings, and check that the PServer you created
is listed in the active connections section.
2
Note
Specify the users who can use the queue, printer options, number of
queues, and password. Refer to the NetWare documentation for details.
NetWare version Protocol Emulation Service mode
NetWare 4.x IPX NDS / Bindery PServer / NPrinter
NetWare 5.x/6 IPX NDS / Bindery PServer / NPrinter
TCP/IP NDPS (lpr)